Where else can you get 73 BB complete exhaust kit, besides TTI?

[WH23G3G]

I'm rounding down the high dollar parts I need to complete my 73 Charger project. The transmission is done. The engine is basically done, tax money will pay for it. I need a set of 5 leaf springs, fuel tank, and complete exhaust from manifolds back. I checked TTI exhaust for the 73 b-body with 400, dual with no mufflers was like $500. I would hate to have to pay that much, but if it's the only option I will. It will just set me back longer and it's already been 4 years since I've got the car. Does anyone else make the complete pipes w/ or w/o mufflers for less than $500. I don't even have anything to take to an exhaust shop to match the routing for the pipes to make custom exhaust. The guy before me put some rusty pipes from the manifolds to the middle of the chassis with two glasspacks. I can't accept that. I want strictly a cruising car with stock mufflers or dynomax mufflers. Just the original style pipes with turndowns at the back under the rear valance.

[John_Kunkel]

Here's another source but the prices aren't much better:

http://accurateltd.com/Complete%20Systems-B-Body.htm

[moparguy01]

take it to any competant exhaust shop (usually NOT a midas or the like) ask around with some car guys and see who they suggest. This is what we did before the TTI crazy. and what i still do cause i can get exhaust made alot cheaper than ttis prices.

[gilbie&hisSE]

You could buy a Summit complete exhaust kit.But it is made for hedders. You can use everything except the head pipes,but you can have those made.The 2 1/2"kit is only $199 with Summit Turbo Mufflers. I had one on a 70 Dart,it looked,fit and sounded awesome ! It is ALL mandrel bent as well ! Someone could make you head pipes to fit the rest,and still spend half or less going through TTI or evem Accurate LTD. I'd get the kit and mock it up and tell them where to direcet the pipes.You'll only need from manifolds to about the cross member just before. I had someone put my kit on for me in about 2 hours for $100. You'll save hundreds !

[idahogrumpy]

Last week end I had a complete aluminized 2 1/2 inch exhaust system installed from the headers back for $369.00. The mufflers were not included in the price.  (I had mufflers) I had an H pipe, exhaust dumps (had these also), and chrome tips installed. It took about four hours but everything was bent and tucked in very nicely. It looks and sounds good. Take your car to a good exhaust shop and have it done. I do not like laying on my back that long.

[Chargerfanatic]

Any compentent exhaust shop should be able to do it for you. With my experience it is all in a program to bend the tubes to what it came with, so you shouldn't need something to go off.

[Charger-Bodie]

for a 100.00 or so more get the best TTI and never look back the stuff fits right and its mandrel bent so its all smooth YOU GET WHAT YOU PAY FOR