Speaker wiring with factory fader control - Confused

[Dodge Don]

As I've noted before....electrical stuff is not my strong suit. So this may seem like a silly question:

I have dual rear speakers and a single front speaker and the factory speaker fader control. How do I wire this up? To make it simple let's use the following terms:

Passenger side rear speaker has wires A and B coming off it

Drivers side rear speaker has wires C and D coming off it

Front speaker has wires E and F coming off it

Speaker fader control has 3 wires coming off it
- Black wire G comes off far left post
- Grey wire H comes off middle post
- Green wire I comes off far right post

Radio has wires J and K coming off iit


So how do these all hook up?? Don't see any wiring diagrams that cover this.

[bull]

I'm no wiring expert either but the topic is covered on this '68 diagram:

[bull]

Here's a bigger one. It's as big as I can go with the 200 kb size limitations. I hope it helps: 

[Doc MoPar]

On a related note, where does the fader control mount??  I have a restoration book that shows it under the dash kinda by the shifter and reverse light if so equipped.  But I also see on e-bay a R. Speaker plate that fits someplace on the dash??  Just curious if anyone knows for sure  where the thing goes.  Pics would be nice as well.

[JimShine]

1968 its on the radio bezel to the right hand side. On 1969 and 1970 cars its down at the bottom of the dash.