stoplights

[jeepee]

This morning a officer told me I've got only stoplights at the right side.Is there someone who could tell me where to look because the connector in the trunk only give's a signal at the brown wire.Normally also at the green?

Thanks for answering J-p 

[Plumcrazy]

You probably need a new turn signal switch.

[Nacho-RT74]

I'M SURE I ANSWERED THIS TOPIC YESTERDAY

brown and green wires of course drives left and right turning signals, but since this bulbs uses same brighter filament to the brakes and hazard functions then the wires are also the same to all those functions.

Check down your column. You will notice you have same colors wires than taillights but coming from inside column on one harness. Check if you have power there.

[BrianShaughnessy]

You probably need a new turn signal switch.

Ding!   Winner   

[Nacho-RT74]

I'M SURE I ANSWERED THIS TOPIC YESTERDAY

of course... but was on 3rd gen website LOL... I was sure I did.

[jeepee]

Who that is a lot of information could you please tell me more my English is not that good that i understand the whole sence.

thanks jeepee

[Nacho-RT74]

where are you from ? My native language is spanish

[jeepee]

The Netherlands!Sorry

[jeepee]

Is it like this switch?


http://cgi.ebay.com/ebaymotors/NOS-MOPAR-TURN-SIGNAL-SWITCH-1970-1971-1972-1973-1974_W0QQcmdZViewItemQQcategoryZ33717QQihZ019QQitemZ290154858187QQrdZ1QQsspagenameZWD1V


Jeepee

[Nacho-RT74]

yeah thats the one, and is really good price for the CORRECT PIECE FOR THE RIGHT APPLICATION 70-74 Mopars without tilt steering column. Mopar replacement parts are with extra wiring for some Big Chrysler models to make works the same on all cars.

what I was saying is ( I'l try to explain it easier )

Rear bulbs have two filaments, one low shine to positioning or parking function and the shine filament to brakes, turning and hazzards lights. This SHINE function is feeded with brown wire on one side and green wire to the other side.

when you use turning lights just brown OR green is feeded, for a while the other side keeps working as usual ( brakes ).

when You don't have turning then pedal brake send power to both sides THROUGHT the turning switch, so then you'll have brakes on both green and brown wires.

Those  brown and brown wires on taill lights are the same you'll see on turning switch harness. You can try to cehck if you have power there. If you do, then problem is not on switch, is on rear harness ort terminals. But if you don't, then is damaged switch.

anyway is hard those wires come bad, I think more the switch. They are starting to came bad now hehehe.