Best place to buy panels

[bricklayer]

I need quater panel skins, left side front fender etc..... need help best place to buy Year one/goodmark/paddock? any others thanks  tom     1969 dodge charger

[Charger1973]

http://cooltruckparts.com/

I know someone who got their 69 quarters from these guys a few years back and was happy with them. 

[Silver R/T]

ebay. Got my 68 quarter for $190 (if memory serves me right) shipped.

[Mfr426]

I was under the impression that they are all made by the same company just resold through resellers like YO/Paddock, etc. Not sure if that is still the case?

I waited for sales and got mine from YO. Be prepared for a HUGE BOX...

[Silver R/T]

Yes they are made by same company (mine was) and yes its big box for 1/4 panel (pretty much a coffin)

[69hemi]

http://www.shermanparts.com/

http://www.megapartsusa.com/index2.htm

Both good places, both nice people

[AutoRust]

Auto Body Specialties is a good source for panels.
They are usually cheaper then Year One/Paddock, or Laysons.
Quarters are truck shipped, so the shipping cost is a bit pricey from any of them.

[smasherofall]

check out this place if there's one near you. They sell shermons stuff below the price on thier websight, they have to order it but normally only takes a couple days, but the best part, they don't charge you shipping!! saves you loads of cash. Ive used the one in Indy a couple times,
never even asked for a deposit.


http://www.abpanels.com/

[69fourspd]

I got my quarters from Auto Body Specialties about 2 months ago.  The fit was pretty nice.  They were drop shipped from Goodmark, so they are the same good pannel most places use (i.e. year one, goodmark...) but cheaper.  They also have the cut outs for the rear side marker light. 

[Troy]

One of my local body shop suppliers carries Sherman parts so shipping is a bit cheaper (but the actual part may cost more). You may want to make a few calls before ordering one. I've had good luck with Autobody Specialties too. Are you looking for a front fender or just a patch? The fenders are not reproduced by anyone but you can purchase patches for the bottom behind the wheel.

Troy

[bricklayer]

Left front fender is rusted at the top down the side where that rubber seam is kinda behind the line of the back of head light. I'm looking for A front left fender   thanks  tom

[bricklayer]

need advice which panels fit better out of box Autobody specialties/Year one thanks need to make my decesion soon  thanks  tom

[bricklayer]

do they all have the marker light cut out  thanks  tom

[69hemi]

If you are talking about quarters they all have the marker light cutout and they are all made in Taiwain so they are all the same.