help: 68-69 hood mounted turn signals

[Manfred318]

I know this will probably sound kinda stupid to you all,but here goes. I just purchased a new set of turn signals for my car and I cannot for the life of me get them in right. Its befuddled me all afternoon. If you guys could maybe explain how those things go in the hood it would be greatly appreciated. If you could also show me a picture of them in the car that would help alot too.
Thanks alot for the help,
--John

[UFO]

Heres the diagram from the service manual.Hope this helps.I have them in my charger but not a photo handy.

[histoy]

The owner of our local restoration shop told me that some of the repro lamp assemblies don't fit the openings correctly.  He's had to file them down before they would slip into the openings.

[Brock Samson]

mine were pretty tight or snug whatever i used a little epoxy on mine to keep em that way cause the nuts were pot metal and corroded a bit..

[Manfred318]

Thanks alot for the diagram UFO  I got em in there now. They are a pretty tight fit but their in there. Thanks alot for the help guys

[Charger-Bodie]

a lot of the reason they fit tight is because of the build up of materials before i paint i clean the opening clear of primer ect and test them this goes for alot of tight parts much easier to deal with before paint