News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

70 front bumper

Started by Nacho-RT74, December 31, 2006, 11:36:53 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

Nacho-RT74

December 31, 2006, 11:36:53 AM
Isn't supposelly the 70 front bumper completelly straight ?

I'm noticing on this pic taken from another thread isn't... they look allmost like a 3rd gen bumpers


I thought in fact 69 daytonas share same bumper and fenders than 70, and they look completelly straight on front edge
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

bill440rt

#1
December 31, 2006, 11:47:31 AM
Ummm... Nope. That '70 looks right to me.
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

70 Charger RT

#2
January 04, 2007, 05:36:05 PM
69 Daytona uses the 70 fenders.  No front bumper for a daytona as it has the nose piece instead.
70 Charger R/T - 440/6
07 BMW 328iS
04 GMC SLE 2500 Diesel

Nacho-RT74

#3
January 04, 2007, 09:16:45 PM
I know that, but allways thought front end was completelly straight. Daytona nose looks also straight on rear end where meets with front clip.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html
Print
Go Up Pages1
User actions