Trunk Floor Replacement Parts

[TruckDriver]

Does anyone reproduce trunk floor pans for the '71-'72 Chargers? I looked in Paddock's catalog, but nuthing. Not even the extentions 

[chrisII]

guess im gladd mine are actually good       good luck tho...

[NHCharger]

Don't know of anyone who makes pans. I bought the trunk floor extensions through Autobody Specialties. They make a generic extension that you cut to length, fit pretty good.

[TruckDriver]

Ok, next question then. Does anyone think that Por 15 will stop the spred of all that rust?

[beenaround]

bro if you don't follow por's instructions to the letter it will peel off!!!ii would use eastwoods rust encapsulating primer in stead.

[TruckDriver]

bro if you don't follow por's instructions to the letter it will peel off!!!ii would use eastwoods rust encapsulating primer in stead.

I never heard of that stuff. Does it go on easy? What is it more less?

This is what I need to coat since I might have a problem finding a rust free trunk floor replacement. I figure I can use some bondo to fill the holes temporarly just in this area.

[sharpspike]

shermans shows the extensions, you might call and see if they can get pans.

http://store.shermanparts.com/cgi-bin/sherman/product_dodge.htm

[TruckDriver]

They do for '73 & '74 Chargers. Not for '71 & '72 like I need

[Drop Top]

That type of rust is just what POR-15 is intended for.

[NHCharger]

I got the trunk floor extensions for my 72 through Autobody Specialties. Like I said, they were generic. We cut about 6" off the length to make them fit in my Charger.

[beenaround]

blast the rust out bro and use eastwood!

[MoparUSAF]

I'm using the Por-15 as we speak!
It looks like it may work!
I am having trouble attaching pictures.....so until that is figured out.....I cannot provide a visual before and after

[BigBlockSam]

blast the rust out bro and use eastwood