News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

3rd gen body piece - repop?

Started by defiance, December 19, 2006, 01:30:00 PM

Previous topic - Next topic

defiance

On a 3rd gen, what is the piece called that runs across the back, right behind the rear window (between it and the trunk)?  Also, that piece - does anyone repop it?  Thanks!

41husk

Natcho can probably say for sure but I don't believe there are any repoped body pannels for 3rd gen at this time.
1969 Dodge Charger 500 440/727
1970 Challenger convertible 340/727
1970 Plymouth Duster FM3
1974 Dodge Dart /6/904
1983 Plymouth Scamp GT 2.2 Auto
1950 Dodge Pilot house pick up

defiance

I think it's called a "deck filler panel"...  I think you're right, it doesn't seem to be reproduced.  Anybody know if the 71-74 are all the same as far as this panel goes, or if I need to look specifically for a 71-72?

Nacho-RT74

Quote from: defiance on December 19, 2006, 02:05:01 PM
I think it's called a "deck filler panel"...

I think that's how is called

Quote from: defiance on December 19, 2006, 02:05:01 PM
I think you're right, it doesn't seem to be reproduced.  Anybody know if the 71-74 are all the same as far as this panel goes, or if I need to look specifically for a 71-72?

I think both are right... and true, 71/74 are the same.
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

Charger1973

Defiance, how soon do you need one?  I may have one available but it wont be for a while.  I have a good spare, but the one on my car isnt perfect and im trying to decide whether to fix or replace it.  It had holes from the original vinyl top and isnt level in a few places like someone pried the moldings off for the vinyl top.  I dont know yet whether I will be switching them or not.  Anyway, if you dont have any luck finding one get back with me and I will let you know when I figure out which panel im going to end up using.

defiance

Thanks- I need it pretty quick (body shop guy thought he could get one, now he can't, and he's waiting on it :P), but I'll check back with you in a while if I don't have any luck :)

Charger1973

Saw this over on moparts.  Might give this guy a call:

Quote71 charger sheet metal, rear valence between trunk and rear window/ and between 1/4's plenty of steel i cut it far back

i have other parts will post when i remember what i have, email or call. make an offer. parts in central connecticut. i have tons of parts so just ask and maybe i have it. email cobrabaitllc@aol.com or call 860-614-1491 jon

41husk

were are you located?  If your close to Stlouis and can come do a pick and pull I can help you out.  It is wrestling season now and I am so busy with that.
1969 Dodge Charger 500 440/727
1970 Challenger convertible 340/727
1970 Plymouth Duster FM3
1974 Dodge Dart /6/904
1983 Plymouth Scamp GT 2.2 Auto
1950 Dodge Pilot house pick up

BLACKWOLF

i have got a 73 with a real good one that i can sell. i am cutting it up anyway.
LINNY SMITH 73' CHARGER OWNER HPAC MEMBER NATIONAL STREET MACHINE CLUB LIFE MEMBER
I'M ON FACEBOOK

hemi-hampton

Some people call them a Dutchman Panel I thought? LEON.