News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Flowmaster super 40 set up

Started by mustanghater, December 18, 2006, 03:21:28 PM

Previous topic - Next topic

mustanghater

Anyone run it? It says its a 4 inch set up that can add up to 50 extra horse power.
New Muscle car forum
http://usav8.com/aamc/index.php
www.myspace.com/spencespeed

Just 6T9 CHGR

Quote from: mustanghater on December 18, 2006, 03:21:28 PM
Anyone run it? It says its a 4 inch set up that can add up to 50 extra horse power.
4" diameter?  Yikes!   would need some serious HP #'s to justify that overkill
Chris' '69 Charger R/T


mustanghater

I haven't heard much about it. I have only seen an ad for the setup in hotrod magazine. They had the set up on a Yellow superbee.
New Muscle car forum
http://usav8.com/aamc/index.php
www.myspace.com/spencespeed

chargerrt

I highly doubt the whole 4" setup thing....I have the 3" setup on mine and I dread having to change the rear shocks :-[.  I'm pretty sure a 4" setup wouldn't fit under the car without a good bit of modification AND I'm pretty sure the Super Bee had the 3" setup and made close to 50 extra ponies and 45lbs/feet of torque.  Do they even advertise a 4" inch setup?  Are people running diesel engines in their Chargers now?

chargerrt

I just looked at the Flowmaster website and they don't even offer a 4" kit...

mikesbbody

from memory im sure it was a 3 inch system i have never heard of anyone selling a 4 inch system

NorwayCharger

Quote from: mikesbbody on December 19, 2006, 03:01:10 AM
from memory im sure it was a 3 inch system i have never heard of anyone selling a 4 inch system

It´s a 3", i have it on my car.
http://www.carcraft.com/techarticles/116_0401_exh/index.html
Sounds great ;D
AKA the drummer boy
http://www.pink-division.com

Hemidog

Quote from: NorwayCharger on December 23, 2006, 08:12:55 AM
Quote from: mikesbbody on December 19, 2006, 03:01:10 AM
from memory im sure it was a 3 inch system i have never heard of anyone selling a 4 inch system

It´s a 3", i have it on my car.
http://www.carcraft.com/techarticles/116_0401_exh/index.html
Sounds great ;D
Do you think i will get my car through the DMV registration test with that system Norway?

TylerCharger69

I don't see a 4" kit either.....I see a 3".   However....you'd best have lots of engine to justify that 4".  I wen't with 2.5   and It's plenty!!   Otherwise  you'll be getting a lot of backfire  when you decellerate.   I use the Flowmaster Delta 40 series.  You have to maintain a certain amount of back pressure through the exhaust for optimum performance  and 4"????  You may as well run it with the exhaust manifolds off....lol

NorwayCharger

Quote from: Hemidog on December 23, 2006, 06:05:33 PM
Quote from: NorwayCharger on December 23, 2006, 08:12:55 AM
Quote from: mikesbbody on December 19, 2006, 03:01:10 AM
from memory im sure it was a 3 inch system i have never heard of anyone selling a 4 inch system

It´s a 3", i have it on my car.
http://www.carcraft.com/techarticles/116_0401_exh/index.html
Sounds great ;D
Do you think i will get my car through the DMV registration test with that system Norway?
There are no db. limit on car that are pre 1971 here in Norway ;D, so i guess it will.
AKA the drummer boy
http://www.pink-division.com