News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

69/70 Taillight panel

Started by warriorbass05, December 14, 2006, 06:10:13 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

warriorbass05

December 14, 2006, 06:10:13 PM
What is a good price to pay for one of these off a car that is no longer with us completely? It has some rust but is all there....

Doc74

#1
December 15, 2006, 08:16:08 AM
Hard to say since it's not something you come across often but looking at charger prices in general, I'd say around $200 would be a fair price if it's cut right.
Just a guess though.

Blown70

#2
December 15, 2006, 09:53:42 AM
You will pay 500 to 800 on ebay. 

warriorbass05

#3
December 15, 2006, 05:29:58 PM
I can take it off the car myself...I need to know how to do that so I get all of what I need....has anyone done this???

terrible one

#4
December 15, 2006, 07:16:43 PM
You will need to cut the spot welds holding it on. There are a lot of them so bring a good spot weld cutter and a lot of patience!

Blown70

#5
December 16, 2006, 10:25:53 AM
Quote from: warriorbass05 on December 15, 2006, 05:29:58 PM
I can take it off the car myself...I need to know how to do that so I get all of what I need....has anyone done this???

Ohhh I did not understand.  I would just cut it with a sawsall.  AND chop off the back 3 inches of the 1/4 and then run along the bottom of tail pannel.

Took me 1/2 hour and 4 blades.....

I say cut the spot welds later.  That is just me....
Print
Go Up Pages1
User actions