68-69 charger bucket seat backs

[koshe]

Mine are gone, and have not been able to find any replacements. Any suggestions what other models would work or where to find some?

[bill440rt]

Any '68-'70 B-body with front buckets should share the same seat backs. You can get the flat panel board repro, & the vinyl from Legendary, however NO ONE carries the all-important metal brackets that hold them in place.
Hello repro-ers?? That would be a very universal much-needed part to repro.

[Ghoste]

Would a 70 back still be the same with the high back integrated headrest thing?

[JimShine]

70 seats are totally different in every way.

Yeah, as said above, the repop backs are available (just heavy cardboard, unlike the originals made of hardboard). But the curved shaping brace and hooks are not available. I have to believe someone could design a same look with a better attaching design.

[jaak]

15 bucks plus 8 shipping.
Jason




http://cgi.ebay.com/ebaymotors/NEW-PAIR-BUCKET-SEAT-BACKS-68-69-CHARGER-CORONET_W0QQcmdZViewItemQQcategoryZ6763QQihZ018QQitemZ280055142292QQtcZphoto

[bill440rt]

OOPS!!!! Major faux pas there. Meant to say any '68-'69 seat back would work. What was I thinking??? 

Jaak, those are the cardboard backings ONLY. There are no metal backets included to install them, you need to re-use your originals. If Koshe's are completely gone and he has NONE, he'll have to start swap meet or eBay scrounging to find a used set with the clips & brackets, then restore them with a new cardboard backing such as the one you found on eBay, & recover with new vinyl from Legendary.

Repro-ers, are you listening??? 

[jaak]

yeah I know they didn't come with clips, I thought he just needed the backings

[smasherofall]

not to hi-jack, but how do you put the covers on? originally they were stapeled, but the shortest staples i've found are too long, maybe glue?

[bill440rt]

Send it to your local interior shop. It's a combo of both staples & glue. They probably have the special staples to do the job.