The Photoshop Thread

[alfanta]

mmm i love this stuff... can you believe I get PAID to do this  Your work is pretty good DS.


It seems your helping people out a lot. Keep it up.

(if you dont mind me getting in on this I would enjoy it. Its good practice for me and fun too. I just dont wanna impede upon your thread)

-RJ

[ds440]

mmm i love this stuff... can you believe I get PAID to do this  Your work is pretty good DS.


It seems your helping people out a lot. Keep it up.

(if you dont mind me getting in on this I would enjoy it. Its good practice for me and fun too. I just dont wanna impede upon your thread)

-RJ

By all means, help yourself!

The more, the merrier.  Plus,  I could use all the help I can get...

[69bronzeT5]

thanks DS!!!!!!!!! another job well done!!
i'm sure by now... you could do MR ANGRY'S with your eyes closed!!! LOL
hmmmmm decisions...decisions......

*cough* choose the last one *cough*   I'm not gunna lie, the last one made my frontal regions tingle. 

Yea, that version of Mr.Angry with the grey stripe and black wheels....simply awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[chargerman68]

hey ds

wondering if you could hook me up...(let me know if this picture is good for your work)

my 68 charger with these hemi rims....

[69bronzeT5]

Hey DS, do me another favour please....that silver 69 R/T you always do for me, can I see it with slotted mags?

[alfanta]

Hope this is sufficient 

[moparstuart]

wow i figured they would look better 
   dont like it at all 

[HITMAN 149]

sorrrrry me either!!!!!!! ewwwwww 
get a set of 22" spinny's!!! hahahaha
J/K!!!

[Brock Samson]

yeah chargers need deep dishes... flushed out rims look like hub caps... 

[alfanta]

yeah chargers need deep dishes... flushed out rims look like hub caps... 

and keep the chrome to a minimum on the rims.

[70charger_boy]

Charger man, I'll save you the trouble in telling you that those 18 inch 06 Charger wheels wont clear the front wheel spindle

[chargerman68]

thanks for the help just wondering could get those rims for only 100 dollars

[HITMAN 149]

snag em  and flip em for a couple more bucks?!?!?!?
then you'd have some money to buy US a calendar!!! hahahaha

[chargerman68]

snag em  and flip em for a couple more bucks?!?!?!?
then you'd have some money to buy US a calendar!!! hahahaha

maybe just wanted to see if they would look nice...

[HITMAN 149]

wellllllllll i hope you saw they LOOOOOK NASTY!!!!!!!!!!! hahahaha
get a set of boyds or AR's!!!!! hahahaha
your wheels look nice on the car the way it is!!! NO???
just don't paint them yellow!!!!! 

[1FastCharger]

They look like old Camaro IROC rims.

[Ponch ®]

Charger man, I'll save you the trouble in telling you that those 18 inch 06 Charger wheels wont clear the front wheel spindle

Then again, it only takes a little machining to get them to clear.

I'd say if they're cheap give it a shot, Chargerman. Worse case scenario you can flip em or you're only out $100.

I'm in no way knocking alfanta's photoshop skills, but they look like 14-15" in that 'chop. I've seen some older MOPARS with those wheels and they look ok. In fact, there was a B-body (don't remember...think it was a satellite station wagon?) at the Fling  with a set of those and I thought they filled up the wheel well pretty good. 

[70charger_boy]

Charger man, I'll save you the trouble in telling you that those 18 inch 06 Charger wheels wont clear the front wheel spindle

Then again, it only takes a little machining to get them to clear.

I'd say if they're cheap give it a shot, Chargerman. Worse case scenario you can flip em or you're only out $100.

I'm in no way knocking alfanta's photoshop skills, but they look like 14-15" in that 'chop. I've seen some older MOPARS with those wheels and they look ok. In fact, there was a B-body (don't remember...think it was a satellite station wagon?) at the Fling  with a set of those and I thought they filled up the wheel well pretty good. 

The problem with machining the wheels is that you have to increase the diameter of the center section by an inch, which means that you can't use the centercap.

100 bucks is a great deal, but as far as a quick flip I will tell you that it will take forever to sell.  I have a set of the 17 inch non polished chrome wheels that I have been trying to sell for over a year for 400 bucks and there are no takers, yet.

[Ponch ®]

Charger man, I'll save you the trouble in telling you that those 18 inch 06 Charger wheels wont clear the front wheel spindle

Then again, it only takes a little machining to get them to clear.

I'd say if they're cheap give it a shot, Chargerman. Worse case scenario you can flip em or you're only out $100.

I'm in no way knocking alfanta's photoshop skills, but they look like 14-15" in that 'chop. I've seen some older MOPARS with those wheels and they look ok. In fact, there was a B-body (don't remember...think it was a satellite station wagon?) at the Fling  with a set of those and I thought they filled up the wheel well pretty good. 

The problem with machining the wheels is that you have to increase the diameter of the center section by an inch, which means that you can't use the centercap.

100 bucks is a great deal, but as far as a quick flip I will tell you that it will take forever to sell.  I have a set of the 17 inch non polished chrome wheels that I have been trying to sell for over a year for 400 bucks and there are no takers, yet.

yep..the couple who owned the Satellite wagon told me...the center cap.

Are these the ones you have?


You haven't been able to sell them because  a) you're asking way, way too much and b) no one really wants them. Most people that are gonna plunk down cash for new wheels are going to upgrade to 20-22's or at least a set of 18" R/T takeoffs.

To give you an idea...a set of the usually more desireable 18" R/T wheels (w/ tires) goes for anywhere between $300-600 (the chrome ones and "Road and Track" that are blacked out inside are the expensive ones). I sold my 17"s (w/ tires) for $150.

[chargerman68]

Charger man, I'll save you the trouble in telling you that those 18 inch 06 Charger wheels wont clear the front wheel spindle

Then again, it only takes a little machining to get them to clear.

I'd say if they're cheap give it a shot, Chargerman. Worse case scenario you can flip em or you're only out $100.

I'm in no way knocking alfanta's photoshop skills, but they look like 14-15" in that 'chop. I've seen some older MOPARS with those wheels and they look ok. In fact, there was a B-body (don't remember...think it was a satellite station wagon?) at the Fling  with a set of those and I thought they filled up the wheel well pretty good. 

hey ponch i remember that car got the idea from it

[Ponch ®]

Charger man, I'll save you the trouble in telling you that those 18 inch 06 Charger wheels wont clear the front wheel spindle

Then again, it only takes a little machining to get them to clear.

I'd say if they're cheap give it a shot, Chargerman. Worse case scenario you can flip em or you're only out $100.

I'm in no way knocking alfanta's photoshop skills, but they look like 14-15" in that 'chop. I've seen some older MOPARS with those wheels and they look ok. In fact, there was a B-body (don't remember...think it was a satellite station wagon?) at the Fling  with a set of those and I thought they filled up the wheel well pretty good. 

hey ponch i remember that car got the idea from it

they looked good, didn't they?

And also down the road you could powdercoat them black and maybe add yellow accents to match the car.

[70charger_boy]

Ponch, these are the ones that I have and yes you're right.  I want to much for them

[Ponch ®]

Ponch, these are the ones that I have and yes you're right.  I want to much for them

you know...ever tried them on your car?

[HITMAN 149]

at least i know i'm not the only one whose driveway has a beard!!!!!!!!
hehehehehe

[moparstuart]

  DS  can you add a black daytona wing to this car   and maybe a red daytona nose front clip ?