daytona aluminum wing for sale

[BigBlockSam]

i remember someone here was looking for one of these.

http://cgi.ebay.com/ebaymotors/1969-Dodge-Daytona-Reproduction-Wing_W0QQcmdZViewItemQQcategoryZ6763QQihZ003QQitemZ130158745670QQrdZ1QQsspagenameZWDVW

[70charger_boy]

 

[BigBlockSam]

thats not a bad wing . anytime you buy one a solid  aluminum wing , it's gonna need work . the first two i bought were raw and worse then this one but they where cheaper . that wing at $600. would be a decent deal . Rene

[70charger_boy]

thats not a bad wing . anytime you buy one a solid  aluminum wing , it's gonna need work . the first two i bought were raw and worse then this one but they where cheaper . that wing at $600. would be a decent deal . Rene

  Should I pull the trigger and but it?

[BigBlockSam]

Should I pull the trigger and but it? 

that would have to be your decision . i paid $600 and $100 shipping from Dane . it was a raw wing with was in rougher shape then this one. then i paid $700 plus $100 shipping off of ebay for another raw wing  and Daytonalo tapped it and got it together for me . remember there heavy. about 85 lbs. i would double check the measurements . I'll measure my wing later and post it.   Rene

[70charger_boy]

Thanks Rene.  I think it's great that you search ebay for wings and noses.  Keep up the good work 

[BigBlockSam]

I think it's great that you search ebay for wings and noses 

thanks bro , i saved alot of money finding parts used and on ebay.

my wing is 24 1/8 high and 16 1/4 at the base . everytime i asked for correct measurements of a daytona wing i got differant  numbers  too .  hope this helps Rene

[daytonalo]

Yea , You charged me 850 !!!!!!! Thanks !!!!!!! Keep in mind , the dem change when casted !!!!!! Ask Dane , He knows all about it !!!!

Larry

[70charger_boy]

Larry, this wing doesn't have any studs or mounting holes.  If I was to send it to you how much would you charge to do it?

[BigBlockSam]

Yea , You charged me 850 !!!!!!! Thanks !!!!!!! Keep in mind , the dem change when casted !!!!!! Ask Dane , He knows all about it !!!! 

i believe it was $800 , but some of that was delivery charge. 

[daytonalo]

It is easy ,I'm sure one of your friends can help you ,  the shipping charge would be crazy .

Larry

[hotrod98]

thats not a bad wing . anytime you buy one a solid aluminum wing , it's gonna need work . the first two i bought were raw and worse then this one but they where cheaper . that wing at $600. would be a decent deal . Rene

I agree Rene, $600 isn't a bad deal for a wing. A good idea might be to find a small machine shop that can tap the holes. They can use a set of wing gaskets from YearOne to locate the base studs.  I sold my aluminum Dane wing for $600 and bought Howie's fiberglass Janek wing. I've been impressed with that wing since the day I installed it on Howie's car. It's already on my triple black R/T. Howie bought one of the hollow Dane wings for his car and no longer needed the fiberglass one. I also bought back all of my daytona stuff from him since he sold his extra 69 Charger and didn't need the extra daytona stuff anymore.  I guess I'm building a clone after all.

[BigBlockSam]

I guess I'm building a clone after all