73 Light Lens Gaskets

[WH23G3G]

When putting the turn signal lengs and housings back in, there is suppose to be a gasket between them. I don't even have one to copy to make. Are they available? I've seen the gaskets for the tail lights on EBAY, but nothing for the side marker lights or turn signal lights. Where can I find them? Or what kinda of material can I make one up from? Year One only offers up to 70 Chargers. There's quite a few side marker lights NOS available, and it's suppose to come with everything, but someone told me it's strictly the lens, no gasket, bolts, or bulb.

[71superbee]

Gaskets are available on ebay for both front turn signal lenses. The side marker lamps are a lens and housing and do not use a gasket,

[hemihead]

The Rear Sidemarkers on a 73 do have gaskets between the light and the 1/4 panel.

[71superbee]

I stand corrected...if you replace the front side markers on 72 and newer (part# 3587436) there are no gaskets
                           if you replace the rear side markers on 72 and newer (part#3587440) the lens and body has a gasket attached to
                           the rear of the lamp....part of the lamp.
           
                           if you are replacing the front turn signal lenses 3514272 and 3514273 a gasket is required and is usually listed on
                           ebay