68 Charger Dash Bezel Reprodced - FINALLY!!

[Corellian Corvette]

Have't seen this posted anywhere. Looks like PG Classics finally has the 68 Dash Bezels reproduced. Just sent them a mail to get a set. We'll see!

http://cgi.ebay.com/ebaymotors/1968-New-Mopar-Charger-Hemi-R-T-A-C-Gauge-Beze-Kit_W0QQcmdZViewItemQQcategoryZ80739QQihZ002QQitemZ120044435173

[Mean 318]

$400!!!

[Corellian Corvette]

Same price as the other ones, though . 

[bull]

They've had them for a little while. I think there's a thread about them somewhere. And yea, $400 is steep but that's about the same cost as a refurbish.

[Mean 318]

  This is getting out of hand!

[charge-it]

They`ve been out for almost 2 months now. I`m going to definately buy a complete set but won`t want to be the first to buy. Has anyone else stepped up to the plate yet? If so, how was the fit and finish? Any issues? I`m also probably going to pull the trigger on the taillight round bezels as soon as I haer a report on those. I did buy the pot metal tail chrome and they were perfect. I also bought the 4 speeeed console plate and that was perfect as well. I may be the first to have 40K in a 318 Charger...by the time I`m done building a bullitt clone...440, console shifted 18 spline 4 speed, 3:54 geared dana 60.

[Mean 318]

Sounds like you are going to have one hell of a nice car! Congrats!!!!

[terrible one]

From what I've heard they are putting out some real nice pieces.

[HITMAN 149]

they seem to have nice stuff...but a lot of COIN!! 
but hey...this stuff aint growing on trees!!! LOL 

[BigBlockSam]

they do look good and my charger needs them . i'm gonna try to restore mine on my own . if i mess that up, then i go for one of these . Rene

[terrible one]

they seem to have nice stuff...but a lot of COIN!! 
but hey...this stuff aint growing on trees!!! LOL 

Haha yeah you got that right. You gotta imagine how much it costs for all of that tooling though.

[Corellian Corvette]

If you think about it - it's not that bad.

First - if you don't have a set there is no way you're going to buy one, and have it restored, for less.
Second - If you sell your originals (Like I'm going to do), you'll make some of it back which will bring the cost down.

I'm getting a set - we'll see how the look.

[dkn1997]

 looks nice, but can i please get a closeup before I drop that kind of cash?  I cannot really tell from the pics if it's painted silver or really rechromed.

[Schuler]

That price doesn't seem bad to me compared to other things. But, are they availible with woodgrain?

[Brock Samson]

yes in '69 Special Edition and Specific '70 Trim.

[Silver R/T]

you'll spend that much just to replate and spray black on them

[rare69]

i bought the 69 wood grain kit from these guys and it looks and fits very ,very nice! one of the best reproduction parts i have ever seen, yeah it is spendy but you wont find a sticker kit that looks half as good.the shipping time was a little long and the box came  directly from china,no kidding!

[DC_1]

Has anyone gotten these yet?.....I am looking for a reveiw?

http://cgi.ebay.com/ebaymotors/1968-New-Mopar-Charger-Hemi-R-T-A-C-Gauge-Beze-Kit_W0QQcmdZViewItemQQcategoryZ80739QQihZ002QQitemZ120057966506

[RIDELIKEHELL]

They`ve been out for almost 2 months now. I`m going to definately buy a complete set but won`t want to be the first to buy. Has anyone else stepped up to the plate yet? If so, how was the fit and finish? Any issues? I`m also probably going to pull the trigger on the taillight round bezels as soon as I haer a report on those. I did buy the pot metal tail chrome and they were perfect. I also bought the 4 speeeed console plate and that was perfect as well. I may be the first to have 40K in a 318 Charger...by the time I`m done building a bullitt clone...440, console shifted 18 spline 4 speed, 3:54 geared dana 60.

$40 k...I'll be well over that for my 68 R/T 440...Can't wait to get some progress made.

[Shakey]

Here are a couple of photos of the P & G products I saw at Moparfest in New Hamburg, ON this past summer.  P & G are the fellows from the East coast of Canada.  These items were not cheap but they sure were nice.   

[Charger-Bodie]

I may be the first to have 40K in a 318 Charger ...............want to race , cause im in the same boat but dont tell my wife!!!

[DC_1]

Here are a couple of photos of the P & G products I saw at Moparfest in New Hamburg, ON this past summer.  P & G are the fellows from the East coast of Canada.  These items were not cheap but they sure were nice.   

They look good but I am more interested in how the 68s look......is the rib detail accurate?.....Shakey, on the ones you took pics of, how are the letter and bezel detail?

[Shakey]

Here are a couple of photos of the P & G products I saw at Moparfest in New Hamburg, ON this past summer.  P & G are the fellows from the East coast of Canada.  These items were not cheap but they sure were nice.   

They look good but I am more interested in how the 68s look......is the rib detail accurate?.....Shakey, on the ones you took pics of, how are the letter and bezel detail?

They were beautiful!  They are on my list of things to buy.

[41husk]

Is that 400 for complete set including the radio bezel?  If so that aint real bad comparativly.

[Charger-Bodie]

400. for air cars 465. w/o air but anyways i ordered mine from herbs and supposedly theirs are better than pg as they have the part number on back and are the better ones of the batch where the pg ones are rumered to be seconds or blems ...but this is just stuff ive been told so i dont know whats true , i will post when mine get here from herbs

[Recharger]

FYI, here's some firsthand feedback on the 69 panels from JimShine from a different thread...for that kind of money, I'd want them to be PERFECT...

http://www.dodgecharger.com/forum/index.php/topic,18027.msg226858.html#msg226858

[41husk]

do the 68 include the radio bezel?

[Charger-Bodie]

do the 68 include the radio bezel?

yes they come full fur either a/c or non a/c

[dkn1997]

or spend 100 bucks and have a complete set without leaving the house!!

http://www.dodgecharger.com/forum/index.php/topic,21063.0.html

[JimShine]

Not sure if it was a mistake, but I ordered AC and received the end bezels (non-AC) anyway.

They are beautiful. Better than original. But I would not say they are 100% accurate. The bebble grain, bezel sizes and pitch in the radio plate were slightly different. I will get pics of them installed. Lee1 has a set of these in it.

[Manfred318]

I know I would like to have a set of those if I just had the $400 to put down at the moment.
Hmmm...Any one want to buy a left testicle? Gently used, only scratched on Sundays $400 or best offer.

[DC_1]

Great...everyone seems satisfied with the 69.....but, WHAT ABOUT THE 68!....thats what i wanna know.

[Charger-Bodie]

Great...everyone seems satisfied with the 69.....but, WHAT ABOUT THE 68!....thats what i wanna know.

Mine should be here first part of the week ill let you know ahen the get here what i think of them