stock distributor wiring problem

[chargerman68]

have stock 440 distributor.has a pigtail with tan/black wire.does the tan wire go to pos lead of coil,blk to neg lead coil.got it with both tan/blkj wire fused together and just one wire to pos lead of coil.thanks

[Carrnutt]

sounds like an electronic distributor? wires would go to ignition module not coil. Points only have one wire and it goes to (-) neg coil post. At least best i can remember, can't seem to find my electronic ignition upgrade files. 

[chargerman68]

has one wire comes with a pigtail.two wires from the distributor to a pigtail.the other side of the pigtail has to connectors on it for the coil.

[chargerman68]

do u have a pic of each of these distributors.electric/points
thanks

[Carrnutt]

well, open the cap if it looks like this pic of a dual point, maybe thats what u have but should still have only one lead wire. But do you mean it has 3 wires total? I dunno what that is  , maybe a conversion or

[Chryco Psycho]

the ECU has 5 wires , Blue to 12 V power , blk to - Coil , & the 2 wires to the dist , the 5 th wire is green & not used

[Nacho-RT74]

Used just if you have double ballast resistor to the 5 pins module

[Chryco Psycho]

5 pin modules were only made for 3 years , & oddly will work with the green wire disconnected