Pro touring charger

[Supercharged Riot]

Pete right?

you got any more pics of what your 6.1 Hemi is sitting on? suspension engine cradle etc.?

Im looking to do a  pro-touring charger also that performs like a modern car.

thanks for  sharing!

[autodynamics]

so fellas its been a while since i posted and allot has been done...i wont bore you with the details but i here is a small list of things i have done in the last month..
changed my dash vents
rebuilt my heater box
installed my a/c
polished my wheels
polished all my trim all around the car....which meant removing and reinstalling it....SCARY!!!!
installed a strut bar under my hood
changed all my hardware under hood...bolts etc..
changed my tail light led's
changed my carpet..wasnt happy with my old one which was only a few years old
re-alligned my windows
re-mounted my door speakers
loomed all my wire harness with some real nice cloth loom
had the car polished
had a new radiator made.....long story my old one cracked from the rad support flex....now i have to rubber isolate the new one...
changed my console...original one was cracked
reprogramed my paddle shifters...really nice now...!!
here are some new pics...real tempted to post a vid..











i will upload a vid later...
http://www.youtube.com/watch?v=dr_a9grADEI

[Hemidog]

Man that charger is so NICE!

Do you have heat in that A/C box? I see that you've plugged the original heater hoses.
Why does those A/C lines go into the passenger wheel well?

[Charger440RDN]

WOW!! Now this is the way you blend modern technology and old school muscle.  

[bigred68]

I just, wow.

[hs1973]

dude awsome car. where did you find those led taillights are they homemade or bought?. i would like to make my 3gen ligths like that.

[PocketThunder]

Do the paddle shifters rotate with the steering wheel?

[autodynamics]

 

Do the paddle shifters rotate with the steering wheel?

yes they rotate with the wheel
[/quote]

dude awsome car. where did you find those led taillights are they homemade or bought?. i would like to make my 3gen ligths like that. yes they make 3rd gen also

Man that charger is so NICE!

Do you have heat in that A/C box? I see that you've plugged the original heater hoses.
Why does those A/C lines go into the passenger wheel well?

the a/c lines run inside the wheel well so not to see them also the heater lines still have to be attached will do that when i put it the radiator. minor things are left rad wont be back for another week...bummer i want to drive it already..
and then when it runs again i still have some suspension to do.....

[Rolling_Thunder]

Damn Pete - she's looking great!   I'm wrapping up my AC lines at the moment myself - what a pain in the ass     

do you happen to know what fitting is used on the fuel rail attachment ?  My 6.1 seems to have a different fitting than everyone else...         

Also - do you happen to have a better photo of the condenser / drier routing ?  I am debating how to do this with mine - might be easier if i have a general idea...     

My brain is soo toasted from doing the wiring   


PS. Tail lights look a lot better than the old ones   

[autodynamics]

Damn Pete - she's looking great!   I'm wrapping up my AC lines at the moment myself - what a pain in the ass     

do you happen to know what fitting is used on the fuel rail attachment ?  My 6.1 seems to have a different fitting than everyone else...         

Also - do you happen to have a better photo of the condenser / drier routing ?  I am debating how to do this with mine - might be easier if i have a general idea...     

My brain is soo toasted from doing the wiring   


PS. Tail lights look a lot better than the old ones   

i can take a pic of the hose routing. basically the #10 and #6 comes from the heater box through the bulk head exits inside the fender well both hoses then split with the  #6 going to the front of the condensor to the dryer and the #10 going to the compressor i ran the #10 along side the rad support with loops and the #6 i ran along side the valance bolts which i used to secure the hose with rubber hose clamps then to the dryer i will post some pics tonight....the led tails look way better in person and looks crazy bright.! Pete

[WHITE AND RED 69]

Good lord that is a beauty! those tail lights are awesome. How were they done? Kit? Excellent Job!

[Just 6T9 CHGR]

Pete...car looks great!

info on THOSE led's please

[autodynamics]

here is a short clip of the lights
http://www.youtube.com/watch?v=t3tESq5QIOk
http://www.youtube.com/watch?v=w5mxe2wN1PU

[jb666]

There are so many things I could say here but WOWWWWWWWWWWWWWWWWWWWWW covers it the best. I am SERIOUSLY impressed with this car and love every aspect of it!!!!!!

[autodynamics]

Pete...car looks great!

info on THOSE led's please

the kits will available next week. ive been working with someone for sometime now and there done...
the kit like mine are $225.00
and sequential will be for another $275.00 i have a few pics of the install.

these prices are going to be a group buy.. pricing

[Rolling_Thunder]

so when are you going to offer them for 68's and the 1st / 3rd gens ?   

[autodynamics]

for first gens the entire tail light panel will be lit.....crazy crazy bright like 900+ led's
68 yes and 3rd gens yes....will have some pics soon... let me know if you need one in particular..

[Rolling_Thunder]

I'll be in the market for a 68 set once i get my car on the road and recoup some $$$   

[PocketThunder]

I'll be in the market for a 68 set once i get my car on the road and recoup some $$$   

Someone is already making them, cant find them right now though, They were $300 a set.

[Hemidog]

I'll be in the market for a 68 set once i get my car on the road and recoup some $$$   

Someone is already making them, cant find them right now though, They were $300 a set.

http://www.hitechledproducts.com/product_info.php?cPath=26_84&products_id=342&osCsid=4756166f96421f19c0e5912a5d5a0139

[Rolling_Thunder]

Yep - I know about those but now I'll have the opportunity to support a fellow member's business   

[autodynamics]

here is a new pic of the car in action this past weekend i took a ride to the Hampton's....


here is a few pics of the engine brace in and my a/c almost done...i moved the heater control valve inside and i still have to block off the firewall plate... should be done in a week or so....my new radiator is in and it nicer than before even though its the same piece they really did a sick job on it.. (Ron Davis)
i can say the car performs better than ever and is quieter than ever bumps and how it handles the road... i just wish i could explain better but its impossible...its actually feels like a modern car... almost... but close...

[autodynamics]

here some of my friends 70 cuda he just finished..this was the first run to stretch out its legs..its a 383 stroked to 500+ real nice execution on this one.

[SG1022]

Both the Cuda and the Charger,  are some truly amazing cars 

[autodynamics]

here was a write up that a friend of mine found......
http://us1.campaign-archive.com/?u=227f02619ae92f3cb93bf60ef&id=12e4b53069&e=b8d1ac5922

can someone post the article up please....thanks