News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Tie Rods Doubt

Started by COKE, September 30, 2006, 03:38:14 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

COKE

September 30, 2006, 03:38:14 PM
Hi,
I,m changing the steering tie rods ends and the sleeves.I have two  new LH thread and two RH  Thread tie rods.
I haave a little doubt:
Both right hand thread tie rods are inner and both LH outer or one of the RH and  one of the LH are inner and the other two RH and LH are outer?

Maybe a stupid question but i have this doubt just now.
Thanks!
69´Charger R/T,440 ,4-speed,Dana 60 3.55.

Chryco Psycho

#1
October 01, 2006, 03:08:18 AM
it doesn`t really matter which way they are installed , I generally use the right thread for outer & left for inner

COKE

#2
October 01, 2006, 02:37:39 PM
Quote from: Chryco Psycho on October 01, 2006, 03:08:18 AM
it doesn`t really matter which way they are installed , I generally use the right thread for outer & left for inner

Yes,i,m also thinking this is going to be the best way.
Thanks!
69´Charger R/T,440 ,4-speed,Dana 60 3.55.

Steve P.

#3
October 08, 2006, 12:16:22 AM
The only person it matters to is the guy doing the alignment. He doesn't care which way they go either. Most of the time they will not even notice..   No worries....
Steve P.
Holiday, Florida

TylerCharger69

#4
October 08, 2006, 10:07:50 AM
 :iagree:
Print
Go Up Pages1
User actions