Front Console Bracket Dimensions??

[68mmcharger]

Apparently the front console bracket was in the way of a previous owner's leg so they cut off part of it on my 68. The car had a cable slap stick shifter in it when I go it. Can anyone give me dimensions of their bracket so I can fabricate a replacement piece? Is the hole in the missing piece the same size as one in the remaining piece?

[tomdroptop]

68 MM charger I had a neighbor make me up a few of the brackets I have them here if your still in need of one email me at tomdroptop@aol.com. if not I can try & get you the dimensions/ 
Tom

[ChargerRob]

tomdroptop, My charger is missing that front bracket as well, it was also removed by the previous owner.
I would like to purchase one from you if they are still available. Thanks, Robert

[tomdroptop]

Robert notta problem I have a few of thoise left & the rear bracket as well.
They are rebops and do not have the holes drilled in them but thats easy enough after you weld or bolt(whichever you decide) them in.
contact me at
tomdroptop@aol.com

[ChargerRob]

Tom, you got mail. 

[tomdroptop]

charger Rob responded & thanx.,Tom

[tomdroptop]

Kevin recd your mail & will send the bracket out to you Tomm. (Tues 10/24/06 thanx again & good luck.
Tom

[68mmcharger]

Tom,

Received the bracket today. Thanks!!!

Kevin