Floor Shifter Gear Selection Plate

[Chris 69]

I am converting my '68 Charger from a column shifted auto to a stock floor shifted auto. It is a 727.

The order of the gears on my column indicator as well as the console indicator is:

P-R-N-D-2-1

How does this order correspond to the shifter gear plate (see attached picture)? From what I can tell,

1 = P
2 = Nothing (Is this R possibly? If so, will the transmission keep the shifter from sliding into P or N?)
3 = R
4 = N
5 = D
6 = 2
7 = Nothing, as the spring loaded shift selector cannot physically slide into the #7 slot.

Can someone please clarify this for me?

Thanks,

Chris

[Chryco Psycho]

1 is the slot to lock park into place 
2 is nothing
3 is reverse
4 is N & drive in the rear end of the opening the shifter can float between the 2 without a detent
5 is 2 nd
6 is 1 st

[Chris 69]

Thanks Chryco.

[Chryco Psycho]

Welcome

[Just 6T9 CHGR]

Or you can do it like this......   

[rare69]

Chris, i tried finding that reverse pattern sticker for the gear selection on moparts and could not find it anywhere. if you stumble across one or find the guy you bought yours threw could you let me know. thanks.

[Just 6T9 CHGR]

Chris, i tried finding that reverse pattern sticker for the gear selection on moparts and could not find it anywhere. if you stumble across one or find the guy you bought yours threw could you let me know. thanks.

The guy's name is Justin and his name on Moparts is     1OFNONE
Do a search & PM him there.
I dont have his email address....

[Chris 69]

I did not notice the reverse shifter pattern until now. I think I'll stay with the stock pattern

[Just 6T9 CHGR]

I did not notice the reverse shifter pattern until now. I think I'll stay with the stock pattern

Sissy........

Just kidding    I have a RMVB and I saw a guy advertizing decals he had made up for his car.....looked pretty cool I thought....fun to see the double takes from those that are paying attention