Transmission Flex Plate Bolt

[Starman417]

Anyone know where I can get some bolts for the flexplate on a 727 tranny?  My engine guy isn't having any luck finding the correct ones.  He even drew me a picture of what they should look like:



There is more on that list I need to get but I'm mainly looking for those bolts.

The carb plate is for a original carter 4bbl.  Speedo cable I can get from year one I believe.

[Chryco Psycho]

I could send a used set if needed
Or Mopoar part # P 4529591

[Steve P.]

Is this a stock converter?? Most aftermarket converters use 7/16 fine thread bolts with no shoulder.

[8WHEELER]

As said, normally 7/16 into the converter no shoulder going into the crank.
http://cgi.ebay.com/ebaymotors/Mopar-6-bolt-Flex-plate-7-16-convertor-bolt-package_W0QQcmdZViewItemQQcategoryZ46098QQhashZitem250005597624QQihZ015QQitemZ250005597624QQrdZ1QQsspagenameZWDVW

Dan

[Starman417]

Hey 8wheeler, looks like those are the ones.  He just drew that out to what he "thought" the dimensions might be.  Appreciate the help.

[Chryco Psycho]

umm which bolts ? flex plate to crank or flex plate to converter ?

[8WHEELER]

Comes with both sets you need.

NEW Mopar Performance

This is a complete set of 6 flex plate to crankshaft bolt set & 4 - 7/16" flex plate to torque convertor bolts for slant 6 , & v8's 273 318 340 340 six pack 360 361 383 400 413 max wedge 426 max wedge 440 440 six pack.           




Dan

[deputycrawford]

Also check Manciniracing.com. They have many of the bolt kits you speak of. Both sizes too.