News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

just bought a set of autometer gauges have a question

Started by chargerman68, February 14, 2007, 12:57:26 PM

Previous topic - Next topic

chargerman68

can i just wire the autometer gauges with standard wire into the engine vitals and dash.if so anyone have a idiot guide to do it.
1968 CHARGER R/T CLONELOOKING FOR ANOTHER PROJECT 69-70 CHARGER SHELL

Plumcrazy


It's not a midlife crisis, it's my second adolescence.

chargerman68

1968 CHARGER R/T CLONELOOKING FOR ANOTHER PROJECT 69-70 CHARGER SHELL

Plumcrazy

Nothing special about wiring them up.  You need a powere supply for them, the dark blue wire at the ignition switch would be my choice.
Then just run a wire from the gauges to the sending units.  Check the directions to see if you can use the factory sending units.

There may also be a wire to the sending units for illumination.  That should be an orange wire going to the cluster.

It's not a midlife crisis, it's my second adolescence.

chargerman68

how do i wire the gauges.do i have to run the wires all the way threw the bulkhead connnector and out to the thing is it or can i tie into the bulkhead connector and use my factory engine harness???
1968 CHARGER R/T CLONELOOKING FOR ANOTHER PROJECT 69-70 CHARGER SHELL

Just 6T9 CHGR

Seperate wiring...I would not tie anything into 38+ year old wires....
Chris' '69 Charger R/T