News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

stupid question.... stock resto

Started by Rolling_Thunder, September 15, 2006, 07:21:02 PM

Previous topic - Next topic

Rolling_Thunder

I used to know what the hell these numbers meant but...       on the front of the valve covers....    there was a number on the front of the valve covers...      driver's side was either an "O" or something else...     showing if it was a 4-speed or an automatic....    what was on the passenger's side ???

I have a 1970 Charger R/T with AC and an automatic....      so what should have been on the valve covers ?
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip

grizzlygiff

on my car, a 69 R/T the number is 916 which is the last 3 digits of the engine part #. this number appears on line 3 of my broadcast sheet under the engine code. my car didn't have any # visible on drivers side valve cover, don't know if it ever was there.

Rolling_Thunder

hmmmmm     thanks man...    been looking through alot of old articles i have...     passenger side valve cover got the last 3 digits of the engine build sheet code...      driver was either "O" for a 4-speed and "125" for a kickdown linkage.
1968 Dodge Charger - 6.1L Hemi / 6-speed / 3.55 Sure Grip

2013 Dodge Challenger R/T - 5.7L Hemi / 6-speed / 3.73 Limited Slip

1964 Dodge Polara 500 - 440 / 4-speed / 3.91 Sure Grip

1973 Dodge Challenger Rallye - 340 / A-518 / 3.23 Sure Grip