News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Need Help Eveyone!!! Does anyone know......

Started by 69chargerboy, August 29, 2006, 10:15:43 AM

Previous topic - Next topic

69chargerboy

Does anyone know of a body/restoration shop in northern Ohio? I have my Charger half completed at a shop now, but they are really dragging their feet! It's has been almost 2 years and there still not done. They keep giving me the runaround. Please Help!
My MoPar Family:
                                       
1968 Chrysler 300 
1968 Coronet 440 4-Dr                                                              
1968 Coronet 440                                       
1969 Charger                                       
1973 Charger SE 
1988 Dodge Custom 150 Pickup

Doc74

Can't help you there but speaking from experience, ie I work for an ass who lets people wait like that..go get your car, tell them you had enough with their bs, make sure clients are present, bad publicity isn't all that great as they say  :icon_smile_big:
Either you do take it with you and don't waste anymore time in that shop or he'll turn around real quick and have it on the workfloor until it's done.

Small tip for anyone who needs to take their car to a bodyshop, especially a resto job. NEVER tell the bossman that time isn't that important and   only quality counts. That right there will make a small bell in the boss' head go off saying ok I can push it in a corner for a while then.
Demand quality and speed, if he can't deliver both, shop somewhere else.
A lot of time and effort goes into restoring a car but that doesn't mean it should sit for months or even years until they start it.

If you can't find any good shops that'll take the job and it's still not done in say a year, gimme a call, I'll be in Michigan.

daytonalo

I'm in new jersey , we just finished up a 69 AMX , we are currently finishing up a hemi daytona clone . The daytona was a rotisserie resto with us car tool sub connectors , new qtrs, roof , floor , trunk floor and it the entire car was sand blasted . P.M me if you want a dependable shop that wont drag their feet . My painter has 20 years exp . We also do powdercoating in house .
                                                                                                                                            Larry 609-315-2230

340_duster