Identify my steering pump.. please

[T16]

 

Think it looks like a Chrysler pump.. but the mounting brackets look all wrong to me..

Maybe it will fit a ´69 383 if I get the correct brackets..?

[Nacho-RT74]

saginaw pump

Chrysler used two kinds of pumps along the years... saginaw and federal.

Depends of year, engine and pump, brackets can change.

[T16]

http://cgi.ebay.com/ebaymotors/MOPAR-Saginaw-Power-Steering-Pump-Brackets-383-440_W0QQitemZ280019325264QQihZ018QQcategoryZ34200QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

So i guess this is what I need then..?

[Chryco Psycho]

those are the small block brackets
you should be able to mount the pump with big block brackets

[Nacho-RT74]

http://cgi.ebay.com/ebaymotors/MOPAR-Saginaw-Power-Steering-Pump-Brackets-383-440_W0QQitemZ280019325264QQihZ018QQcategoryZ34200QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

So i guess this is what I need then..?

Probably if seller is right, then those are teh ones you need...
A guy with saginaw pump and engine up 72 will help better, I have a 73 with federal pump, totally different on location and groove used on crank.

[T16]

Ok.. thanks 

One more question.. the pulley on the pump, will it fit both SB and BB..? Or do I have to change it..?
Planning on using the pump on a non AC 383"

[8WHEELER]

I know for sure on the Chrysler Federal pump, there small block pulley has a different off set than the  big block pulley.

I think the Saginaw pumps are the same, but check in to it.

Dan

[Nacho-RT74]

it looks all pumps on my Catalog it says the same PN to all setups, differences are basically  on brackets. just differences on pump itself if pulley shaft is threated or key sloted  ( Federal )