News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Quick Question

Started by JMF, August 25, 2006, 05:27:55 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

JMF

August 25, 2006, 05:27:55 AM
If a 440 is bored 30 over what is the cubic inch of it?

myk

#1
August 25, 2006, 06:46:10 AM
A 441.8?

JMF

#2
August 25, 2006, 06:55:23 AM
Ok, is there any kind of calculator thing  anywhere?

4402tuff4u

#3
August 25, 2006, 07:03:45 AM
I think I was told 446, but I'm not sure. Good question.
"Mother should I trust the government?........... Pink Floyd "Mother"

1973ChargerSE

#4
August 25, 2006, 03:39:32 PM
To calculate volume of an engine, use this formula: pi x r^2 x h x c, where r= bore/2, h = stroke, and c = number of cylinders.

For the stock 440, its 3.14159 (pi) x 2.16 (4.320/2) x 2.16 x 3.750 x 8 = 439.722 cubic inches.

For the bored 440, its 3.14159 x 2.175 (4.350/2) x 2.175 x 3.750 x 8 = 445.850 cubic inches.


-Greg

Chryco Psycho

#5
August 26, 2006, 01:40:35 AM
Greg has it right  Welcome Greg BTW

1973ChargerSE

#6
August 26, 2006, 08:28:40 AM
Thanks, Chryco.  I'm glad to help out when I can,  although I will probably be asking a lot more questions than I answer!

Chryco Psycho

#7
August 27, 2006, 03:42:05 AM
No prob , that is what this site is for
Print
Go Up Pages1
User actions