Question about 3rd gen fender part numbers

[Charger74SE]

Can someone tell me what year 3rd gen fenders are by these part numbers. Left fender (3672031), right is (3672030). I do know that they are not 74 fenders. I think they are 73's.   

Mike

[FLG]

If you positive there not 74's then just go by the side marker light. If its not recessed then its either a 72 or a 73 fender. I can check my fenders to see, where is the Pn located?

[Nacho-RT74]

fran, I hardly think you'll find the PN with all years grease, undercoat and everything including paint itself since is printed and not stamped

73/74 fenders are the same and as far I know not with supersedes numbers.

those numbers are not on my 74 catalog... for Charger fenders PN I have 3685968-9

those numbers begining with 36xxxxx could tell me is a 73 PN from a car with diff PN and aspect than a 74 model

[Charger74SE]

If you positive there not 74's then just go by the side marker light. If its not recessed then its either a 72 or a 73 fender. I can check my fenders to see, where is the Pn located?

P/N is located midway down the fender rail where it bolts to the engine sidewall. See pic.

Mike

[Nacho-RT74]

Mike... did you compare it with the PNs I provided ?

mmmm... I can't recall my fenders with those numbers, but I can be wrong of course... unless body man covered

I know you can find the printed PNs on dealer shops on inner wheel area, above the wheel opening.

[Charger74SE]

fran, I hardly think you'll find the PN with all years grease, undercoat and everything including paint itself since is printed and not stamped

73/74 fenders are the same and as far I know not with supersedes numbers.

those numbers are not on my 74 catalog... for Charger fenders PN I have 3685968-9

those numbers begining with 36xxxxx could tell me is a 73 PN from a car with diff PN and aspect than a 74 model

I also have a 74 parts catalog. I have seen the part number printed on the inside of the fender a few times but can you explain the stamped numbers in these pics.
The red fender is from my 74SE. The stamped number is located midway down the rail where the fender bolts to the sidewall.
The last pic is the right fender from my 73SE parts car. The first three numbers are unreadable but there is a very faint letter "W" followed by 132.
I'm thinking this might be a production number instead of a part number.

[Nacho-RT74]

well, simply, I don't know

would it need to check with a 73 catalog then. A friend of mine does have one.