Cluster Restoration.

[Armycopter]

Anyone have a recommendation for paint on the bezel face. Mine is black not woodgrain. Would like to paint it but don't know which brand or type paint to purchase. Thank you.

[rikubot]

SEM trim black with duplicolor adhesion promoter 🤙

[Armycopter]

Thank you!!

[rikubot]

Welcome. Post pictures when you're done

[twalker]

Anyone have a recommendation for paint on the bezel face. Mine is black not woodgrain. Would like to paint it but don't know which brand or type paint to purchase. Thank you.

SEM Landau Black

[AKcharger]

Hit that with a heat gun or hair dryer and work it down?

Tried, 1st picture was after heat gun, this is before. also if you peel the sticker off it rips off your paint 

it's in its way to D&H  in south Carolina, luckily I had a spare head

Oh! D&H did a AWESOME job

[472 R/T SE]

Hit that with a heat gun or hair dryer and work it down?

Tried, 1st picture was after heat gun, this is before. also if you peel the sticker off it rips off your paint 

it's in its way to D&H  in south Carolina, luckily I had a spare head

Did you install it wet or dry?

[AKcharger]

Installed wet so I could position it. I couldn't see where dry would make a difference.

[dgp_naples]

I have a 67 Charger and installed new lenses and a new bezel. Upon reinstalling, my headlights come on, my wipers work but I have no gauges working nor any electroluminecent lights. I have checked the wiring and have a wiring diagram, all seems to be in order. I think it might be a ground issue or a power issue. what do you suggest I do to get power to come on?