AVS metering rods

[69CoronetRT]

Does anyone have or do you know where I can get metering rods for an AVS? 16-575 is preferred but a 16-164 will work.

Thanks in advance.

[grouseman]

You could look for an AVS Strip Kit, or check with the local carb shops to see if they've got any hanging around. 

[Corellian Corvette]

I was looking everywhere for someone that had an AVS to Edelbrock conversion chart - nobody seems to know.

What I did was get a really nice micrometer. Assuming you have the 2-step (like edelbrock) rods, you can measure the tips and figure out what the edelbrock rod is.

[69CoronetRT]

While I haven't contacted them directly, I've been told the new rods are like AFB rods and too short for a direct swap. Using the E rods requires chaning the top pplate. Guess I have to call them directly to find out.

Thanks

[johntpr]

www.daytonaparts.com  helped me .   They had rods very close to what i needed.

[69CoronetRT]

www.daytonaparts.com  helped me .   They had rods very close to what i needed.

Thanks. That's a new lead. I contacted them.