News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

eddy heads

Started by orange68, July 22, 2006, 05:09:23 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

orange68

July 22, 2006, 05:09:23 PM
Thinking of getting a set of eddy heads. I have a 440" with "six pack pistons" 11" Dynamic conv. and I'm thinking of an Engle cam K56 or 58. The heads comes with springs (right) but what is the limits of these springs? Can I run it with these cams, and what are your suggestions.

no318

#1
July 22, 2006, 05:36:57 PM
I am pretty sure that they are rated to .600 lift.  They can be bought bare or complete.  I bought mine from Hughes (with their cam) and they will trade you out of the stock Edel. springs if you need something more serious. 

orange68

#2
July 22, 2006, 07:16:16 PM
I thought of buying the complete set. they should manage the engle cam as I see it, or ?

no318

#3
July 22, 2006, 08:33:57 PM
That is what I did.  They are a good fit.

firefighter3931

#4
July 22, 2006, 10:28:38 PM
Quote from: orange68 on July 22, 2006, 05:09:23 PM
Thinking of getting a set of eddy heads. I have a 440" with "six pack pistons" 11" Dynamic conv. and I'm thinking of an Engle cam K56 or 58. The heads comes with springs (right) but what is the limits of these springs? Can I run it with these cams, and what are your suggestions.

The stock Eddy springs are fine with either of those cam profiles.  :yesnod:


Ron
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore ignition  authorized dealer ; contact me with your needs
Print
Go Up Pages1
User actions