Leaf Springs

[THE COLONEL]

Where is the best place to get R/T or H/D leaf springs.  I have been searching for a little while now, so does anyone have a direct link to some of the springs ya'll are using, and What do you guys reccommend.  Thanks!

[Ghoste]

Eaton Detroit Spring company.  Great service, parts in stock and built to factory blueprints.

http://www.parts123.com/PartFrame.asp?ZTM=cadegdia&GHOME=www.eatonsprings.com&TITLE=Eaton_Detroit_Spring

[8WHEELER]

I have bought two sets from Mopoar, and a few friends of mine have used them as well, no problems.

But there are some people that have said they got weak fast, they are made in Mexico, my friends
at Chrysler have not heard one complaint. So if my springs go weak before they should, I will buy
from someone else.

Dan

[Chryco Psycho]

I have installed 2 sets of Mexican Mopar springs they will drop 2.5" or more in the first 6 months
do they want a complaint from me or my customer ?

[THE COLONEL]

I have installed 2 sets of Mexican Mopar springs they wi; drop 2.5" or more in the first6 months
do they want a copmplaint from me or my customer ?

Well, mine are already flat as a pancake, so I might stay away from those ones.   Anyone else recommend a company that sells them?

[8WHEELER]

I have installed 2 sets of Mexican Mopar springs they wi; drop 2.5" or more in the first6 months
do they want a copmplaint from me or my customer ?

Both Niel, give it to them with both guns    if they have not heard bad things, they should 

Eastside Chrysler Bellevue WA.  425-451-2886, SORRY NO 1-800 NUMBER

Dan

[Chryco Psycho]

I will call them , My local Mopar dealer has heard the complaint

[tan top]

i have read  a bout this also .not hijacking the thread guys ,  i have  not long put  a pair of  MP  hemi / r/t springs  on mine, is it just the recently manufactured springs ,as i have had the new springs sitting in the garage for 2 years before  i fitted them ,   or is it all of them

[bill440rt]

I have the MP spings in my '68, with no problems. They've been on the car at least 3-4 years now. Car still has a nice stance to it, I can fit 295/15/50's out back with no problems.

[tan top]

thanks ( bill440rt) for the info , appreciated  so i wonder why there have been some pairs that have flattend out or sagged                                                                                                                                                                                                                                                                                                                  

[smasherofall]

try these people,  http://www.espo.com/ best price going and very good quallity   

[andyf]

Talk to the guys at Mancini Racing.  They carry MP springs as well as other brands.  They also have new spring hangers and spring hanger reinforcement plates (like the Hemi cars came with) if you need those.

[Lightning]

has anybody tried MP's "oval/dirt track" Springs?  It said that the spring rate was 120lbs per inch. Then it says that the fronts are 20.5" long and the rears are 35" long.....so this means that it's a 4200lb spring? whereas the Super Stock springs are 3800lb ones?  (am I reading this right?)

[Ghoste]

The spring rate means the amount of force required to deflect the spring one inch. 

[THE COLONEL]

Thanks Guys.