whitch intake to street 440

[deputycrawford]

Greenrt SE, what cam do you have. I use the 18 degree bushing and run mine at 36 degrees total. Ask Firefighter but you might want to try 36 with the 18 degree bushing. It might have more idle vacum and idle smoother. Just my two cents though. I'm glad to hear you have it running great.

[dodge freak]

Hey Deputy-get your motor back together yet ?  Hope things work out ok.

[greenrt_se]

thanks depudy,I think to try 18 deg bushing, tomorrow I drive to the Sweden and maybe there I chance the bushing,in some morning...

[greenrt_se]

and the cam is 223/228 0,050 hughes hydraulic

[deputycrawford]

Nope, motor not together yet. I expect it in two weeks though. Green, You mmight have the perfect combo already. Just check your vacum at idle. It should be around 15 inches or so. I thought you had a bigger cam that needed more idle timing. I would go so far to say to leave it alone. Thanks for the return of the info.

[greenrt_se]

vaacum in idle is little bit over 14"

[deputycrawford]

I say not bad for a built 440. Just drive that thing and tell me to stop butting in...lol

[darkside]

greenrt se do you have any pics of your linkage set up with the demon and rpm?thanks

[greenrt_se]

here

[darkside]

thanks,were did you get the linkage set up?

[andyf]

Mancini Racing, Mopar Peformance, MagnumHP, Bob Mazzolini Racing, Mayo Performance, etc.  They all carry those tall adjustable throttle linkage kits.