Can someone help me with my e-brake?

[MadScientist]

hi,

Im trying to get my e-brake assy off the firewall etc so I can redo it, but I cant figure out where the 3rd fastener is.  I got the two that go into the wheel well off, but cant find the third.  Any help greatly appreciated!

MS

[mikepmcs]

what car are we talking about? year and model please

[MadScientist]

Oops. Sorry about that.  70 Charger 500 4spd 383.  Everything else is out of the interior down to the firewall.

MS

[blackcharger]

there are two studs that go thru the firewall, behind the front tire, and a third that goes thru the pedal assemblt towards the drivers side .

[MadScientist]

there are two studs that go thru the firewall, behind the front tire, and a third that goes thru the pedal assemblt towards the drivers side .

Where exactly is the one that goes through towards the dirvers side?  Thats the one I cannot locate.

Thanks

MS

[blackcharger]

without tearing my car apart, I can't say excatly. I think it's in the middle of the assembly,

[tan top]

third one is bolted  from the in side  , the hole in the parking brake mounting frame for this is just below the brake warning  light switch

[MadScientist]

Can you see the mounting point in this pic?  Pic is from SMS

MS

[tan top]

   not from that picture .to see the bolt hole you need to push the pedal forward . i have arrowed its location .

[MadScientist]

Thanks for the map!  I ll tak e a look in ther again this weekend

MS