door hinges

[darl5433]

My driverside door has some slop in it. You have to lift it up a little to get it to close. So I took the door off to see, and there is slop in the hinge. I was trying to figure out if it is easier to get a new set of hinges or to take the existing ones apart and put a larger rod in the hinges?

[darl5433]

Ok so I answered my own question by doing a search. What is the best place to get the pin and bushing kit?

[Doc74]

Most shops carry those since just about everyone needs them, here's the Year one link for them so you know which you need.
http://www.yearone.com/serverfiles/headline.asp?hid=120AD5164

http://www.yearone.com/serverfiles/part.asp?pid=RSP15&c=0&e=0&cat=1&hid=120AD5164

[chargedup]

I have the same problem with my 74 and need pins and bushings and was wondering if it would bee the same as the second generation chargers or not?

[Silver R/T]

try these
http://cgi.ebay.com/ebaymotors/66-67-68-69-70-Charger-door-hinge-pin-repair-kit-pins_W0QQcmdZViewItemQQcategoryZ33642QQitemZ8070498512QQrdZ1

[darl5433]

So I took care of my hinges this weekend and got ready to put the door on. Well it took about an hour to get the door set so it would close but the gaps aren't very even. I was wondering if anyone had some sugestions or ideas on how to do this?

[Nacho-RT74]

patiente

[darl5433]

That is what I was afraid the answer would be.

[BigBlockSam]

i did mine on my raodrunner. i had to grab the doors and man handle them. lean on them and bend them. to get them correct. Rene