Can some one help me here?

[THE CHARGER PUNK]

Can somebody help me out with the positioning of the fender scoop on the daytona and how big the hole was eneath the fender scoop?,(also was the superbird fender scoop in the same place as well???), hemigeno could u help me out here as u seem to have acess to ur daytona and is willing to measure stuff out much appreciated -MATT

[69_500]

The Superbirds didn't have the hole in the fender under the scoop. Only the Daytona's.

[WINGMAN]

 On my original Daytona it looks like 27 3/4 inches from the front of the fender to the scoop, 23 3/4 inches from the back of the scoop to the farthest point on the fender, looks like 1/4 of a inch on each side of the scoop to the edge of the fender and the hole looks like 5 and 3/4 across. Hope this helps.   JR.

[THE CHARGER PUNK]

i knew there was no hoel i nthe superbirds fenders, thnx 4 the info tho

[Arigmaster]

Mine are at 16 1/4" from the spot where the rear corner of the hood and cowl meet to the rear of the scoop. Then again...It's not a daytona.