Taylor Wires:

[Captain D]

Hello all,

Curious about these Taylor wires to ask please:

https://www.summitracing.com/parts/tay-84072?srsltid=AfmBOorNw2djSiqWBTgJoxQASKJJOIvlmGrB6MzZ6RpLWTOLy3lsFC5r

Do these 'snap' into place, other than their extended length,  any pros vs cons, such as snug fittings and such? I've ran FireCores and certainly a quality / thicker wire. But, didn't know if they're overkill for my application as I'm not building anything for the strip, etc. - just a cruiser, but I prefer the lower resistance, especially running MSD, EFI, & electronic ignition.  And, their ohms resistance seems essentially the same to FireCore.

Thanks for any feedback / input.

[John_Kunkel]

As a personal preference, I never use made-to-length pre-terminated wires, they restrict the routing. I prefer to choose the length and install the distributor ends myself.