News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

'69 Charger Front Hub Needed For 10 Inch Front Brakes

Started by 1969R6RED, November 12, 2024, 08:06:44 AM

Previous topic - Next topic

1969R6RED

Hi... Morning all..I'm looking for a front Hub for my '69 Charger with 10 Inch brakes front brakes. I'm hopping that anyone here on the site might be able to have one or lend a hand to help track one down.. ;D  ;D

Thanks..   Jim

John_Kunkel


The hub and drum are an assembly but can be separated. Why do you need the hub only?
Pardon me but my karma just ran over your dogma.

1969R6RED

Hi John.. Good morning.. I'm in the middle of changing all the studs to right hand threads.. So I als decided to check run out on the hubs while I had the front drums off.. I found that one of the hubs had an exceive amout of Radial Run out.. Like .025" So that would also explane some of the brake pedal pulsation that I was having..  So that is the reason that I am looking for a hub..

Thanks.. Jim

John_Kunkel


Where are you measuring the radial run out? If the new RH studs are correctly swedged to retain the drum, the drums will need to be turned anyway and that will correct the run out.
Pardon me but my karma just ran over your dogma.

b5blue

Aren't there 2 different style hub/drum assembly's.