how does automatic transmission gearshift control torque bracket fit on 727

[christianlarsen]

I bought a gearlinkage set but it apparently that does not include the "automatic transmission gearshift control torque bracket" and also the control rod that connects to the gear-selector on the tranny.
Im attaching a picture of the missing parts.
Can anybody enlighten me (possibly with a picture) where the automatic transmission gearshift control torque bracket mounts on the tranny. It seems like im missing something the 2 bolts should attach to on the transmission? I found the control bracket for sale but want to make sure im not just missing the next thingy

[70 sublime]

The transmission will have two loops with holes in them molded into the bottom of the transmssion that the bolts will go through 

[John_Kunkel]

Some truck tailhousings don't have these loops.

[christianlarsen]

hmm ok then i suspect i have a truck tailhousing 727....is there a workaround for this or do i also need a new 727???

[70 sublime]

How was the gear shifter working before or is this the first time you are putting it together ?

[John_Kunkel]

hmm ok then i suspect i have a truck tailhousing 727....is there a workaround for this or do i also need a new 727???

The tailhousing can be replaced in the car. I have seen homemade support brackets bolted to the case ear shown by the red arrow.

[christianlarsen]

ahhaha found the holes! I have the correct tailhouse, thanx guys for great help!!