Classic Auto Air custom A/C/heater plate

[timmycharger]

I have an older Classic Auto air system for my Charger which finally is working great.  The only thing that I am not happy with is that the plate where you select the defrost, heat or fan is off now.

I filled the a/c myself but in the future if I want to have it done, the person will not know how to turn the a/c on because none of the selections line up anymore with the aftermarket a/c box.

My solution was to 3d print a plate that can be double side taped to the original, avoiding any damage. I designed the plate on tinkercad, then 3d printed it and used a high quality chrome pen to finish it off. It is not perfect and this version took me 16 tries but I may even consider sending it off to be chromed. 

work in progress but thought I would share.

[b5blue]

Very clever! 

[Kern Dog]

Pictures UPsized:
















Great work.
I like seeing the 8 track!

[timmycharger]

Thanks! I need to figure that out, they always load small. 

[Dino]

Nice work!