When did you last: Pull an engine-replace a clutch-rebuild a Holley?

[NHCharger]

I modified my shop roof for two lifts. does that count??

[Kern Dog]

Last week I put a roller 360 on the stand and tore it down. It was bought for $500 from a friend.
It has the desirable #308 heads and is a roller cam engine with a cam from Hughes engines, an Air Gap intake and Holley valve covers. It blew two head gaskets so I tore it down after seeing rust scale in a couple cylinders. My machinist has it now, he will determine how far it needs to be bored. It is .020 now, I sure hope he can make it work by .030, if not, .040. It ought to outperform the 360 already in my 67 Dart since this roller engine has a more aggressive cam, a better intake, a bit more compression and it will have headers too.

[Kern Dog]

....A few days later I helped a buddy pull the Magnum 360 and Tremec from his '68 Dart. We will be doing concurrent 360 builds here at my place. FUN stuff!