What have you done with your Charger lately?

[RTSE440]

Fully rebuilt my ac/heater box very happy how it turned out but one expensive box had to source nos actuators ,h valve, fan motor, heater core and ac evaporator

Did you do it or send it out? Looks great

No didn't send it out did it myself it was a bit of a challenge as i sourced all new old stock actuators and other parts purchased new heater core and evaporator new fan motor & gasket kit. i pressure tested everything after assembling the unit so i know it won't leak it's not hard to do once you have the parts.I doupt the guys that rebuild these go to this extreme as the actuators are only available nos but i may be wrong

[twenty mike mike]

I drained and refilled the differential. Thanks to some previous owner who drilled and tapped the housing for a drain plug, the job didn't suck.

[Charger-Bodie]

I drained and refilled the differential. Thanks to some previous owner who drilled and tapped the housing for a drain plug, the job didn't suck.

I do that to all of mine

[timmycharger]

Finally stopped raining long enough to give it a wash.  I didn't take any pics of them but I had really good luck getting the brown off of the tires/white lettering with some Black Magic tire cleaner that I got from Walmart. 

[70 sublime]

Have been working on my 70 project
Got the rebuilt 440 running for the first time last week

[TTSaleen]

Finished the year off by dyno tuning my 68 Charger.
It's got the Gen 3 Hemi (5.7) out of a 2006 Dodge Charger Daytona car.
Made 335hp and 390tq at the wheels.
I got the tune dialed in on E85 and it runs great.
Now it sits behind me in the garage with the cover on it for winter months.
Ryan

[GordonGriggs]

 Ran them a while. Took a photo.

[tan top]

Ran them a while. Took a photo.

      ,
  do i spy a DMCL charger     on the right hand side behind your first generation charger