News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

8 Stack EFI

Started by cdr, October 06, 2023, 10:16:26 AM

Previous topic - Next topic
Print
Go Down Pages1
User actions

cdr

October 06, 2023, 10:16:26 AM
just wanted to show Ya'll the proper linkage to use for a Street application 8 Stack EFI, the link bar that most come with will pull on the slave bank side as the engine heats up, it will cause that bank to run lean, the hotter it gets the more things expand & the more it pulls on the slave bank side, I would use this on Street OR race car. Its called Jack shaft linkage
https://www.youtube.com/shorts/Vn8igQFrOis?feature=share
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr
Print
Go Up Pages1
User actions