News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Daytona Z-Bracket Dimensions for Plywood Nose Cone Jig

Started by RSI700VIPER, July 31, 2023, 10:05:30 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

RSI700VIPER

July 31, 2023, 10:05:30 PM
Picked up an original Daytona steel nose cone recently that is in need of some metal work.  I would like to build a jig out of plywood to support and brace the cone while work is being performed on it.  Can anyone provide the C-shaped dimensions of the part of the Z-bracket that fits into and bolts the cone?  Thx.   
69 V2 Daytona 440 4-Speed 3.54 Dana
70 FJ5 Superbird 440+6 4-Speed 3.54 Dana
69 Talladega Torino 428 CJ
69 Mercury Cyclone Spoiler II Gurney Special
70 T6 Challenger T/A 4-speed
70 V2 Challenger R/T 440 Six Pack 4-speed
71 FC7 Challenger Vert Flemington Speedway Pace Car
71 V2 Challenger RT Formal Roof w/ V2 Stripe & Houndstooth
Print
Go Up Pages1
User actions