69 Charger Bracket Mystery

[mike337]

As I continue to open long dormant boxes of parts to put back into my 69 Charger, I continue to run into things I do not recognize after 20+ years.  This is the latest.  Is it a bracket for an A/C part??

Any help would be appreciated!

Mike

[Mytur Binsdirti]

Doesn't look familiar to me.

[A383Wing]

the bottom of that bracket looks like it would fit in the channel of the bottom of the dash cluster, like for a light or something. The metal is too thin to be any type of bracket for AC

[Daytona R/T SE]

It's an air conditioner evaporator core line bracket thingie.

I have them on my '72 Chargers, My 69 Chargers don't have them, at least the one I just looked at doesn't.

The small hole is for a screw that goes into the firewall, the hex shaped hole goes over the "nut" area of the line going into (or out of?) the evaporator core. Prevents the tube of the core from being twisted when the a/c line is installed.

I took a picture, but I don't feel like resizing it right now, maybe tomorrow.  

[Daytona R/T SE]

Here it is...

[mike337]

Thanks for clearing up the issue.  Now back to the other hundred or so parts to install.

Mike

[Daytona R/T SE]

Thanks for clearing up the issue.  Now back to the other hundred or so parts to install.

Mike