Need a engine mount measurement 69 charger

[1st_charger]

Does anyone have a set of engine mount brackets for a big block that they could measure  for me? The one that bolts to the engine, I need the distance between the 2 mounting holes for the rubber mount? I bought a set from 440 source and a set of rubber isolators and either the hole on the  engine  bracket are wrong or the isolators are wrong. Because if I try to put them together the little bump on the isolators does not line up with the engine bracket. Thanks for any help!

[mopar346]

Seems like someone would have answered this by now, I'm in Jersey this week but will gladly measure for you and report back when I get home Sunday.

[Mike DC]

 
It's kinda hard to visualize exactly what measurement you want.  Could you post a pic or something? 

[1st_charger]

Sorry can't post a pic, I need the measurement of the 2 holes on the engine mount bracket that the rubber mount (part that bolts to the k frame) attach to. One hole is for the stud and the other is for the raised locator bump on the rubber mount. I need either center to center or distance between the holes.

[1st_charger]

 
It's kinda hard to visualize exactly what measurement you want.  Could you post a pic or something? 

Thanks I really appreciate it!

[mopar346]

I tried to post pictures, but it wouldn't let me, they appear to be an inch and half apart. I sent the pictures to the email in your profile.

[375instroke]

I've ran into that issue, too.  I had to grind down the bump.

[1st_charger]

Thank you!