Does any body sell rebuilt, ready to go 727 transmissions?

[Daytona R/T SE]

Does any body sell rebuilt, ready to go  727 transmissions ?

For a second generation crate Hemi in a '69 Charger?

[John_Kunkel]

http://www.aandatrans.com/Products/727-Big-Block-Street-Performance-(1966-Up)__22000B.aspx

http://727specialist.com/

[cdr]

Cope Racing Trans, CRT

[Mopar Nut]

Monster transmissions.

[Daytona R/T SE]

Thanks Guys. 

I just checked out Cope's website and found this:

https://www.coperacingtrans.com/?product_cat=assembled-transmissions


Apparently, they no longer offer complete transmissions.

[moparstuart]

Thanks Guys. 

I just checked out Cope's website and found this:

https://www.coperacingtrans.com/?product_cat=assembled-transmissions


Apparently, they no longer offer complete transmissions.

sorry to hear as his stuff is amazing

[Bossman963]

TCI makes a great 727 tranny

[BSB67]

http://www.aandatrans.com/Products/727-Big-Block-Street-Performance-(1966-Up)__22000B.aspx

http://727specialist.com/

Ricky Allison (A&A) would be my first, second, and third choice.

[Slowpoke]

Rick at A&A does great work he built mine 30 some years ago. no issues at all.

[John_Kunkel]

TCI makes a great 727 tranny

Keep in mind that many of the builders like TCI, B&M, etc. offer products from all makes while A&A and 727 Specialist deal only with Mopar...worth considering.

[Kern Dog]

TCI makes a great 727 tranny

Yeah?
How did they get the nickname Total Crap Inside?

[aerolith]

I do!

How many do you want lol???

Now here in lies the problem with 727's...

All pre 1970 transmissions have the wobbly front-drum syndrome.
Most are OK but a few are going bad after 50+ years of service...

So either convert the early ones, with a 71-up stator support shaft and drum etc., or.
Just get a 71 Hipo trans to start with!
Obviously not a hemi one but a sixpack if you is very lucky...

A hemi trans would have had the 'hemi drum' but its been proven that a '5 plate' stock wide bearing, steel drum is up to snuff!

They can only be fitted to 71 and up hipo trans or modified earlier ones lol.

Clear as MUD!

ps, when you say second generation, you mean 426ci hemi derivative?

pps, the only thing a hemi trans needs is a steel drum and a bolt in sprag (clutch roller assembly)
(and 4 pinion planets and hemi input shaft etc) lol...

[aerolith]

The most important part of a 727!

A 'bolt in sprag'...

If you don't have one then you is playing 'Russian Roulette'...

[6pkrtse]

We have a guy here in the Detroit area always at swap meets or has someone passing out business cards call Torqueflights by Randy. I have never used them but maybe he has some built ready to go.

[469 runner]

I have a transmission built by Rick Allison of A&A Transmissions.  It is a great piece that has held up very well.  I have also purchased many parts from A&A. He manufactures many parts for the torqueflite transmissions.  He is a great resource for us all.  I have also purchased parts through Pat Blais's ebay store, "torqueflite patty".  He is also very knowledgeable and I am sure could build you a great unit.  Just depends where you are and what area could be more convenient.  Indiana or Washington.

[Daytona R/T SE]

  Thanks to all that have replied.