Front wheel seal size

[AZMoparboy]

Hi, I'm working on my new 68 Charger project and have purchased a set of 1972 spindles and floating caliper brackets to replace the drum setup. I then ordered up a pair of 1973 and later rotors. I have the bearings size figured out but I can't for the life of me come up with the seal that fits the small bearing spindle and then also fits the later disk rotor. I know that someone has done this and could help with the make and part number, Please.

But then again, am I trying to do something that won't come together? I've been known to try things that just weren't meant to go together. If there is such a seal please advise.

Mopar or car,
Azmoparboy

[58pwrwgn]

I thought Dr diff or someone was making a sleeve that fit the spindle. This allowed the use of the larger 73 bearing and seal.

[AZMoparboy]

Thanks 58pwrwgn,  you were right, Doctor Diff had the seals and not to high of a price, $15.00 to the door for 2ea. Seals. There is a part number that is  stamped on it (17002A / 4950 / 17458). Now that I know the part number I thought I'd post this so that if anyone that would ever need this rotor to spindle combination, the information can be found here with a search for the seal and they can purchase them locally where they live

Thanks again,
Steve, azmoparboy