News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

1969 Charger intake manifold fitting

Started by WIRE, January 09, 2022, 10:50:12 AM

Previous topic - Next topic

WIRE

picked up a 1969 Charger, trying to return it to stock looking. What intake manifold fitting was used for manual brakes, A/C and headlight doors. Thanks for your help

Texasdoc

https://www.forbbodiesonly.com/moparforum/members/69chargerr-tse.36841/
Spend the money and do it right the first time, or spend more money and do it over, so it's right.

WIRE

440 motor, no power brakes, A/C with hide away headlights. I need one that doesn't have a place for the power brake hose, like in the picture.

69bfan

Todd Hoffman provides the different fittings to the different vendors.  If you look down the page for the attached link, it gives you the different styles that are available and applicable sizes.  You will most likely have to use a plug for the power brake booster port.

http://www.hoffmanswinnerscircle.com/05_brake_service.htm
Restoration Parts and Materials
Weatherstripping is our specialty, but we stock a wide assortment of restoration needs.
www.restorationpartsandmaterials.com

Wingnut426

I'm have the correct fitting. Contact me, VEIGHTPETE@GMAIL.COM  
HEMI Daytona Convertible

Wingnut426

OP found one already. Contact me if you need this. WINGNUT426
HEMI Daytona Convertible