1969 Charger intake manifold fitting

[WIRE]

picked up a 1969 Charger, trying to return it to stock looking. What intake manifold fitting was used for manual brakes, A/C and headlight doors. Thanks for your help

[Texasdoc]

what engine?
Power brakes and headlights, do you have AC?
http://www.hooverautoparts.com/index.php?cruising=products&category=Brake%20Parts&subcategory=Vacuum%20Fitting

[WIRE]

440 motor, no power brakes, A/C with hide away headlights. I need one that doesn't have a place for the power brake hose, like in the picture.

[69bfan]

Todd Hoffman provides the different fittings to the different vendors.  If you look down the page for the attached link, it gives you the different styles that are available and applicable sizes.  You will most likely have to use a plug for the power brake booster port.

http://www.hoffmanswinnerscircle.com/05_brake_service.htm

[Wingnut426]

I'm have the correct fitting. Contact me, VEIGHTPETE@GMAIL.COM  

[Wingnut426]

OP found one already. Contact me if you need this. WINGNUT426