News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Brain Damage @ the track

Started by cdr, January 07, 2022, 05:40:11 PM

Previous topic - Next topic

cdr

well I finally made it to the track, SAME FRIGIN fuel pressure problem as before GERRRRRRR, BUT I pulled 3 wheelies LOL, MPH was down at least 4mph because of fuel pump problems, still ran a best of 10.93,,,,,,,,1.51 60 ft, also got to race a new Super Stock Challenger, he kicked my a$$,,I cant duplicate it on the street,you can hear it, on the data log it spikes very fast through out the run from 20 psi back up to 50, in a 1 second veiw in the log it does it about 4 times Yes 1st 10 smile ,, and I remembered to shift LMAO
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

Todd Wilson


XH29N0G

Wonderful!

I really enjoy what you share and really like your car.

I don't want this to sound bad about the challenger, but I like your car much better and the sound much better.

Thanks.

:cheers:
Who in their right mind would say

"The science should not stand in the way of this."? 

Science is just observation and hypothesis.  Policy stands in the way.........

Or maybe it protects us. 

I suppose it depends on the specific case.....


bakerhillpins

Nice runs.  :cheers:

Quote from: cdr on January 07, 2022, 05:40:11 PM
SAME FRIGIN fuel pressure problem as before GERRRRRRR

Rather than have you rehash things for the Nth time, do you have a thread on here where you're discussing the situation and steps you've taken?
One great wife (Life is good)
14 RAM 1500 5.7 Hemi Crew Cab (crap hauler)
69 Dodge Charger R/T, Q5, C6X, V1X, V88  (Life is WAY better)
96' VFR750 (Sweet)
Capt. Lyme Vol. Fire

"Inspiration is for amateurs - the rest of us just show up and get to work." -Chuck Close
"The difference between stupidity and genius is that genius has its limits." -Albert Einstein
Go that way, really fast. If something gets in your way, turn.
Science flies you to the moon, Religion flies you into buildings.

BSB67

Very nice Charlie.  Good weather down there on track day?

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

Q5XX29

dakota_gt on Instagram

tan top

 awesome stuff !  charger looks mean   :coolgleamA: :2thumbs:

bummer about the fuel  pressure , might of missd it  in one of your previous posts , but what fuel pump  tank / lines set up do you have ?
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

cdr

Quote from: BSB67 on January 08, 2022, 06:06:56 PM
Very nice Charlie.  Good weather down there on track day?

Thanks Russ ,YES very good, right at -1300  to - 1000 ft on my runs, all that said, the car ran its best yet, BUT with my fuel pump issues I think it slowed it down quite a bit, I am Still VERY pleased & happy with the results so far, No Roll cage ,this car is a drive it anywhere street car, AC, OD, 4.10 gear, 4100 lbs ,drove to & from the track again, 140 miles, drove there, put the long runners on & let the tires down to 20psi, all of 5 minuets work,the 512 is getting tired, been leaned out so many times from all the fuel problems I have had. I am VERY Happy though !!!!! :)
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

cdr

Thanks everyone for the positive responses, I have a Tanks Inc EFI tank with a Walbro 450LPH pump, return system, at 1st I had a 30 amp relay in the glove box area for the pump, time before at the track fuel pressure was spiking 0 to 50 psi the entire run, got home & found the plug to the relay was melted some, redid the set up with a 80 amp continuous duty solenoid in the trunk close to the battery & fuel tank & put a 450 lph fuel filter on it, did lots of fuel volume test & everything looked great I thought, tank was almost full for the runs, has to be I have a bad connection inside the tank at the pump or a defective pump, will drop the tank & let Y'all know what I find.   
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

BadA55charger

That's awesome!!!   Love your build and your twist on things....such cool package you built and designed.  Hope you work out your fuel issues but it sure runs strong now!   Congrats. 

INTMD8

Great launch pic  :2thumbs:

Interested to see what you find with the fuel pump.
69 Charger. 438ci Gen2 hemi. Flex fuel. Holley HP efi. 595rwhp 475rwtq

67440chrg

Dang cool car and fast too. Congratulations on the best pass yet and it sounds like it will be even faster soon.

kent

Kent

WHITE AND RED 69

Awesome!!! That baby is hauling!

Bummer about the fuel pressure issue but that's still a damn good time and even cooler that you drive it there and back.
1969 Dodge Charger R/T
2016 Jeep Grand Cherokee 75th edition
1999 Jeep Grand Cherokee
1972 Plymouth Duster

c00nhunterjoe

Having that car lift the tires straight without a roll cage is DAMN impressive. I cant do that. Mine twists way too much even with 2x3 weld in frame connectors that are tied fully to the floor.

cdr

I was sent another picture, Had to share with Y'all, it made all the work on my street car worth it, puts a big ole smile on my face even though I still have the fuel pump issue
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

kent

Kent

funknut

Great pics!  Car looks mean!  :2thumbs:

tan top

Quote from: cdr on January 24, 2022, 10:06:38 AM
I was sent another picture, Had to share with Y'all, it made all the work on my street car worth it, puts a big ole smile on my face even though I still have the fuel pump issue

new favorite picture ...shame no sound with that one  ;) :cheers: :2thumbs:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

BSB67

That's a nice pic.  What's your 660 and trap mph? 

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph

cdr

Quote from: BSB67 on January 29, 2022, 05:06:29 PM
That's a nice pic.  What's your 660 and trap mph? 

660 , 100
1/4 , 120

On the log the fuel pressure starts dropping off & on at about 300ft, in 2000ft air my MPH has been 123, but that was also with fuel problems.
LINK TO MY STORY http://www.onallcylinders.com/2015/11/16/ride-shares-charlie-keel-battles-cancer-ms-to-build-brilliant-1968-dodge-charger/  
                                                                                           
68 Charger 512 cid,9.7to1,Hilborn EFI,Home ported 440 source heads,small hyd roller cam,COLD A/C ,,a518 trans,Dana 60 ,4.10 gear,10.93 et,4100lbs on street tires full exhaust daily driver
Charger55 by Charlie Keel, on Flickr

BSB67

Yep. History and the data suggest top end fuel delivery.  It looks like your 660' mph is pretty close to normal, right?

What do you think is the root cause?

500" NA, Eddy head, pump gas, exhaust manifold with 2 1/2 exhaust with tailpipes
4150 lbs with driver, 3.23 gear, stock converter
11.68 @ 120.2 mph